| |
I.
Create Mother Card: Connect the power line
to the IC, press the “Reset Button” at the
back, after a ‘tick’, touch the TM Card
which you want to become Mother Card lightly
to the hole of lock, after a long ‘tick’ and
a short ‘tick’, the TM card is recognized as
Mother Card by the lock. Each lock can have
one Mother Card at the most; the last one
replaces the prior one.
II.
Create Child Card (the capacity is 15 for
each lock)
1.
Create Guest Card: touch the Mother Card
lightly to the hole of lock, after a ‘tick’
and the LED flashes in green, the lock is
unlocked, touch the Mother Card lightly to
the hole of lock again, after a ‘tick’ and
the LED flashes in green, touch the TM card
which you want to become Guest Card lightly
to the hole of lock, after a ‘tick’ the TM
card is recognized as Guest Card by the
lock. (You can continue to touch the other
TM Cards before the LED stops flashing.
After 8 seconds you touch the last card, the
LED stops flashing)
2.
Terminate Child Card
1) Terminate one Child Card: Touch
the Mother Card lightly to the hole of lock
for 2 times successively, the LED flashes in
green, touch the Child Card which you want
to delete from the lock lightly to the hole
of lock, after 2 short ‘tick’ the Child
Card’s information is deleted from the lock.
2) Terminate all Child Cards: Touch
the Mother Card lightly to the hole of lock
for 3 times successively, the LED flashes in
green, after 3 short ‘tick’ all of the Child
Cards’ information is deleted from the lock.
III.
Unlock the lock: Touch the Mother Card or
Child Card lightly to the hole of lock,
after a ‘tick’ and the LED flashes in green,
then the lock unlock, and after a while the
lock locks automatically. If you want the
lock unlocked always, you should turn the
“Option Switch” to the end; touch the card
again to lock the lock.
IV.
Sign of failed operation: LED flashes in red
and 3 short ‘tick’.
Low voltage warning: If the batteries’
voltage is low, when touch TM Card that will
be a long successive ‘tick’ from the buzzer. |
|
